Custom Gates · Orlando, FL
Gates built for openings standard sizes don’t fit: wide and sloped driveways, angled entrances and front-entry gates. Planned with your fence, sized to the opening and hung to swing true for years.
Get a free custom gate estimate
We’ll call to schedule your free on-site measure. No pressure.
When Custom Makes Sense
Off-the-shelf gates come in set widths and heights. When the opening, slope or look calls for more, we build the gate to the site.
Double drive gates sized for wide driveways, RVs, boats and trailers, with posts and hinges heavy enough for the span.
Swing direction, hinge position and bottom clearance planned so the gate clears a rising driveway instead of dragging.
Openings that aren’t square or a standard width, measured on site and built to fit.
A new gate in the same material, color and style as the fence it joins.
Arched tops and decorative panels that set the look of the front of the property.
Posts, frame and hardware sized for an electric operator, installed now or later by a licensed specialist we coordinate.
Materials
Custom gates are built in the same materials as our fences, so the gate and fence look right together and weather the same way. More examples in our gate gallery.
Board styles to match your fence, on a steel or braced frame that keeps wide leaves square.
Aluminum-reinforced frames inside matching vinyl panels, in privacy, picket or decorative tops.
Arched or flat tops and spear or flat finials, powder-coated so they won’t rust.
Wide swing and rolling gates for yards, equipment and commercial access.
How It Works
Custom gates are measured and planned on site before anything is ordered.
We measure width, height and slope, and look at how vehicles and people move through it.
Material, style, swing direction and hardware chosen to match your fence and how you’ll use the gate.
A fixed, itemized price, plus the drawings and specs your HOA asks for.
Gate posts carry the load, so they go deep in concrete and heavier than line posts.
We hang the gate, set hinges and latches, and adjust until it swings and latches cleanly.
Automation
A custom drive gate is the right time to plan for an operator. We size the posts, frame and hardware for automation, and bring in a licensed operator specialist for the operator itself.
Powered and vehicular gates always need a permit in Orlando. See our Orlando fence permit guide.
Local Know-How
Bigger and powered gates bring rules a simple walk gate doesn’t. We plan for them at the estimate.
20-ft driveway setback
In Orlando, a gate across a driveway must sit at least 20 feet back from the property line.
Powered gates need a permit
In Orlando, vehicular and powered gates always need a permit, even on a fence that otherwise wouldn’t. We handle it.
HOA appearance rules
Many HOAs set gate style, height and color. We supply the drawings and specs they ask for.
Drainage & clearance
Driveway gates need clearance over curbs and slopes, and posts that won’t shift in wet sand.
Reviews
★★★★★
Joni Fussell
Google · July 2026
★★★★★
Floyd Bradley
Google · April 2026
★★★★★
Mark Gustin
Google · February 2026
Questions
What Orlando homeowners and businesses ask us most about custom gates.
A custom gate is built to the opening instead of picked from a standard size. Width, height, slope, style and hardware are planned for your site and matched to your fence.
Yes. Wide openings are usually split into a double drive gate so each leaf stays manageable. We size the posts, hinges and frame to the span after measuring on site.
Yes. We measure the rise and plan the swing direction, hinge position and bottom clearance so the gate doesn’t drag. On some slopes a sliding gate works better.
Usually, if the material and color are still available. We check at the estimate and build the gate in the same style.
We build and hang the gate automation-ready. The operator is installed by a licensed specialist we coordinate, so you have one point of contact.
A walk or drive gate on an exempt residential fence in Orlando usually doesn’t. Vehicular and powered gates always do, and driveway gates must be set back 20 feet. Other cities set their own rules; we check yours at the estimate.
Free Estimate
Free on-site measure and a written quote for a gate built to your opening.
Tell us about your gate
Only name and phone are required.